|
Facility List: Inspection Equipment
-
PECo ND300 CNC Gear Measurement System
The ND300 is a 4 Axis, computer controlled, inspection
system that can measure gears and other geometric features
utilizing a 3-Dimensional scanning probe. Gear tooth
geometry Profile, Helix, Pitch, Runout, Tooth Thickness &
Size, form-roundness, and 3D related feature single point
and scanning measurements are performed in a volumetrically
error mapped and thermally compensated work zone utilizing
“off-the-shelf” components featuring non-contact Linear
Motor technology and a Renishaw precision scanning probe
head that is “Crash Protected”.
-
Keyence IM-6225 Vision Measurement System
The IM-6225 is a 2 Axis computer controlled inspection system that can measure multiple features such as
lengths, diameters and other geometric features utilizing a 2-Dimensional vision system in seconds.
Field of view on the Wide field: 3.94″ X 7.87″, On High precision: 0.98″ X 4.92.
-
Keyence IM-7030 Vision Measurement System
The IM-7030 is a 3 Axis computer controlled inspection system that can measure multiple features such as lengths,
diameters and other geometric features utilizing a 2-Dimensional vision system combined with a Z-axisprobe.
Field of view on the Wide Field: 7.87″ x 11.81″, on High Precision: 4.92″ x 8.86″, and it has a 2.95″ Z-axis probe range.
-
Niton XL5 XRF Material and plating thickness analyzer
The XL5 detects and measures trace elements for FAC modeling (Cr, Cu, Mo), Verification of material composition
to spec and prints at receiving inspection. Plating and thickness testing to the Diameters and other geometric
features utilizing a 2-Dimensional vision
Other software features: Unknown Gear or spline
software, Root scan, Diameter Roundness scanning, 3D related
features, Tooth timing, Worm inspection, Hob and Shaper
cutter inspection, and Compare before and after Heat treated
parts. Maximum Part size 12" Diameter by 16.5" long.3
Station Auto Probe Changer w/ Renishaw SCR400 holders.
- Numerex, coordinate measuring machine, model 1518-12
with CMM Manager software
- Pratt & Whitney supermicrometer, model C for gage
calibration.
- Wilson model 5235 digital rockwell hardness tester.
- Zeiss Surfcom model 130A surface roughness measuring
machine with adjustable granite base. Allows for
inspection of angular and conical sufaces also for
thread and gear flanks. Results are printed on a thermal
paper or can be down loaded to a PC for statistics and
storage.
- Jones & Lamson, optical comparator model Epic 214
with digital readout and surface illuminator, 8-1/2" X
32" table magnification 10X thru 100X.
- (3)Deltronic model DH-216 optical comparator, 16 inch
screen with MPC5 digital readout
computer processor.
- Gleason No. 6 universal hand rolling and power bevel
gear tester.
- Vari-roll gear checker with redliner.
- Vari-roll gear checkers.
- Vari-roll uprights for gear shafts
- Vari-roll compound testers for worm and worm gear sets and helical gears
- (5)Surface plates.
- Precision height gage.
- Master gears.
- Master gage blocks.
- Ceramic master block set calibrated to NIST
- 3 steel master block set calibrated to NIST
- Precision bench centers.
- Sunnen PG-800 precision gage with PS-400 and PG-500
setting fixtures
- 1" pressure micrometer.
- 2" pressure micrometer.
- 3" pressure micrometer.
- Diatest bore gage .125" to .5" dia.
- Dial bore gage .5" to 6.00" dia.
- Miscellaneous special and standard hand tools.
- Indicators.
- Drop indicators and stands.
- Gear wires.
- Deltronic Plug gages.
- Plug and ring thread gages.
- Plug and ring spline gages.
|